Using an orbital sander is an easy process, and you get the results within less time. When you are sanding by hand, it takes a lot of time and also not possible to get the perfect finish. You can use it safely by knowing how to use the best orbital hand sandercorrectly. If you need to get professional results to take up the below tips for using an orbital sander.
Safety preparation:
Safety is essential while sanding the surface. Ensure you have all the right tools before starting the process. For comfortable and safe make some preparation. Before you begin with best orbital hand sander wear protective glasses and dust masks. Use gloves before handling the sander and select the appropriate sanding disks. Even there is a hook and loop system you have to ensure whether the disk is firmly placed. It results in uneven sanding when the disk clogged with debris.
Dust extraction:
To make your working environment safe use dust extraction and ventilation. The wood surface will free from dust and debris if you use the dust extractions. Now, many orbital sanders come with the dust collection bag which aids in removing debris while you are sanding. When you have the clean surface, you could monitor the progress and get the exact finish.
Move the sander manually:
You must keep moving the sander constantly. Although many orbital sanders move with the random action, moving the sander manually helps to get even and smooth finish. The edge of the surface should handle with the care it is important to keep ¾ of your sanding pad on the material. Otherwise, you will end up with the round over effect on the edges. The perfect finish determined by considering the edges, so sand the corners of the materials carefully. As you are sanding use the full disk on the area.It helps to have a smooth sanding action and power distributed equally over the sanding disk.
Maintain constant pressure:
For the best sanding results, you have to maintain a constant pressure level on the surface. The orbital sander will slow down and becomes less effective if you push too hard. Also, you could not maintain the heavy pressure level throughout the process. It might result in an uneven surface. It is advised to maintain the light pressure so that you get the smooth and even surface. Hence, follow the above tips for getting expected results.
